Call Management routes your property's incoming calls, schedules on-call maintenance teams, broadcasts messages to residents, and collects inbound messages and voicemails. Use it to set up and keep full on-call coverage, with team members managed centrally in the Admin Center and a calendar view to check every day is covered.

🎬 Watch it in action: Watch: Manage Deactivated Team Members in Call Schedules

🎬 Watch it in action: Watch: How to Post Property Notices in Call Management

  In this article

Before you start

  • Access: property access and a default role (Admin, Process Manager, Standard or Limited).
  • User management: every team member is added through the Admin Center.
  • Call Management uses the Admin Center for each user's name, email, phone number and roles.
  • Escalation permissions: assigning an Escalation Contact in Community Settings needs the Manage Call Management Community Settings permission (Admins and Process Managers have it by default).

  Every on-call user needs a phone number

Fix any missing phone number before you request activation. Without a valid phone number, an on-call user can't receive calls or texts.

Open Call Management settings

1.  Log into your HappyCo account

Log into your HappyCo account.

2.  Open Call Management

Go to the Call Management tab.

Open Call Management

3.  Open Settings

Click the Settings tab to begin configuration.

Role access in Call Management
Role Primary scope Typically can
Administrator Full configuration and access control Add or deactivate users, reset passwords and manage user profiles. Assign roles and set property access (who can see which properties). Create and edit roles and permissions (including CMv2-related permissions). Manage Call Management configuration for the organization (global and property-level settings where applicable). Manage on-call and schedule participation settings (if enabled for your org).
Process Manager Operational management for assigned properties or regions, without full admin-level control Perform day-to-day manager workflows for assigned properties (review and triage work, oversee operations). Update certain property-level settings and workflows that support operations (depending on your configuration). Manage projects, boards and workflows when the role includes those permissions (some project actions can be permission-specific, like Cancel).
Standard User Execute the day-to-day work View and work items they're assigned access to (properties, queues and work as configured). Update records they're responsible for (status updates, notes, completing tasks) within the allowed permission set. Use CMv2 features needed to do the job, but usually can't manage users, roles or org-wide settings.
Limited User Restricted or minimal access (often read-only or tightly scoped) Access only the specific areas needed for their job. Usually cannot manage users, roles or configuration. Often used for temporary users or highly constrained roles (exact abilities vary by your Admin Center role setup).

  Pick the role that matches the person's job

In Call Management, the role also controls whether someone is put on the property's on-call team. Giving everyone a broad role could put non-technicians in the call tree.

  Already set up? Skip the wizard

The Setup Wizard is a guided workflow for configuring a property for the first time. Existing users with configured roles and settings can skip it and schedule directly.

  Who can run the Setup Wizard

The Setup Wizard is inside Settings. Only roles with View Call Management Settings can use it (Admin and Process Manager by default).

Run the Setup Wizard for a new property

1.  Open the Setup Wizard

In Settings, click the dropdown next to the Settings heading and select Setup Wizard.

Open the Setup Wizard

2.  Configure office hours

Set your time zone and custom open and close times for each day. Use Apply to All to duplicate weekday hours.

  Tip

These hours dictate when after-hours routing begins.

3.  Review your onsite team

Check that all necessary team members appear.

Review your onsite team

  Tip

A missing user must be added through the Admin Center.

4.  Build your first call tree

Select a Primary On-Call Technician, assign Backup Technicians, and set a time delay (0 to 9 minutes) before the call escalates to the next person.

Build your first call tree

  Tip

At 0 minutes, the backup is contacted as soon as the primary attempt counts as no answer (the request wasn't opened from the SMS link). 3–5 backups are recommended.

5.  Customize your answering service

Enter a Welcome Message (maximum 200 characters) that plays when a call is received.

Customize your answering service

  Tip

Preview the audio in the browser or by calling your property number.

6.  Set up call forwarding

Note the dedicated Call Management forwarding number shown on screen, then contact your phone service provider to forward your property's main number to it.

Set up call forwarding

7.  Review and save

Review your configuration and save to finalize the setup.

Review and save

  Default escalation

If no one in the call tree answers, or the call tree is empty, the call routes to the Maintenance Supervisor and then the Property Manager.

Create an on-call schedule

1.  Open the On-Call Scheduler

Go to the On-Call Scheduler tab.

2.  Start a new schedule

Click New Schedule or click a date on the calendar.

Start a new schedule

3.  Set the shift times

In the Schedule Details tab, select Set to Full Day or enter custom start and end times.

Set the shift times

4.  Assign the call tree

In the Call Tree tab, assign your Primary and Backup Technicians.

Assign the call tree

5.  Set recurrence

In the Recurrence tab, choose whether the shift repeats (Weekly, Bi-Weekly or Monthly) and set an end date or occurrence limit if needed.

Set recurrence

6.  Save the schedule

Click Add Schedule.

  Who can edit the on-call schedule

Editing needs the Manage Call Management On-Call Schedule permission plus access to the property. This covers creating, moving, duplicating and deleting schedules, and assigning the call tree in a schedule's Call Tree tab.

  • Admins and Process Managers have it by default.
  • Standard and Limited users can view the schedule but can't edit it.

Move or duplicate a schedule

1.  Pick move or duplicate

Click the Move or Duplicate icon on an existing schedule block.

Pick move or duplicate

2.  Drag it to a new date

Drag and drop the schedule block onto the new date.

Drag it to a new date

3.  Choose what to update

When prompted, choose whether to update just that schedule or all future recurring schedules.

Change or delete a schedule (bulk updates)

Change or delete a schedule (bulk updates)

Click an existing schedule to open the side drawer. From there, adjust timeframes, swap personnel or delete the shift. Apply changes to a single schedule or in bulk to future recurring schedules.

Add an exception for one day

Add an exception for one day

Click the ellipses (â‹®) on a calendar date, then choose:

  • Add Exception: for sick days or temporary coverage changes.
  • Duplicate Schedule.
  • Delete All Schedules for that day.

Check on-call coverage on the calendar

Toggle between Month, Week and Day views to check coverage. A circle with a green checkmark on a date means full-day coverage is configured. Missing timeslots are filled with the default contact and show as a gray block labeled Default.

Deactivated on-call team members (Missing Contact)

Deactivated on-call team members (Missing Contact)

When a scheduled team member is deactivated in Settings, the on-call calendar shows an alert. Every day that member was scheduled is highlighted with a Missing Contact tag. Fix it by deleting the schedule or reassigning it to another team member.

Fix a schedule with a missing contact

1.  Delete or reassign the schedule

To clear it, click Delete Schedule and confirm: all days the deactivated member was scheduled are cleared. To hand the shifts to someone else, click Reassign Schedule.

2.  Choose the replacement (reassigning only)

In the dialog, choose another team member. They replace the deactivated member in every schedule that member was assigned to.

Choose the replacement (reassigning only)

Set team member notifications (Settings > Teams)

1.  Open Teams

Go to Settings > Teams.

  Tip

User profiles are managed in the Admin Center; notification preferences are managed here.

2.  Open a user's notifications

Select a user and click the Notifications tab.

3.  Toggle alerts

Toggle SMS and Email alerts for each call category: Emergency Maintenance, Routine Maintenance, Courtesy Officer, Leasing Agent and General Inquiries.

Toggle alerts

  Permission to change team notification settings

Changing a team member's call and notification toggles in Settings → Teams needs Manage Call Management Users Settings. Administrator and Process Manager have it by default.

  Where Team Setup statuses appear

  • The team list
  • The status filter
  • The member drawer
  • Under the default contacts

Conflict flags appear on the Team Setup screen after activation.

Community settings: contact information

Community settings: contact information

Go to Settings > Community to configure property-wide preferences. Under Contact Information, assign essential backup contacts and route specific roles, such as Leasing Agents and Courtesy Officers.

  Designate an Escalation Contact

You must designate an Escalation Contact so emergency calls are always answered.

  Backup and Escalation Contacts

Emergency fallback contacts are set in Settings → Community → Contact Information, which needs Manage Call Management Community Settings. The Backup Contact is the Maintenance Supervisor and the Escalation Contact is the Property Manager.

Community settings: office hours

Community settings: office hours

Adjust your property's open and close times in Office Hours.

Community settings: resident communications

Community settings: resident communications

Enable automated workflows to keep residents informed:

  • Maintenance Survey: texts a 1-5 rating request after an emergency work order is completed.
  • Task Alert: alerts the resident when a work order is generated from their voicemail.
  • Proof of Task Completion: the technician must upload a photo before marking a task complete.

Resident Alert (Notify tab)

Resident Alert (Notify tab)

The Notify tab has three tools for mass communication and urgent alerts. Resident Alert is an immediate text-to-speech voice message played for residents before they reach the standard phone menu, for water shutoffs or time-sensitive updates.

  Update the Resident Alert remotely

Text "HELP" to your forwarding number to update the Resident Alert.

Community Broadcast (Notify tab)

Community Broadcast (Notify tab)

A mass communication tool for non-urgent updates, such as event reminders or policy updates. Broadcasts go out by automated phone call, SMS or email, and emails support attachments. To record custom audio for a phone broadcast, call the PIN code provided once the process starts.

Schedule a Community Broadcast

1.  Start a broadcast

Go to Notify > Community Broadcast and click New Broadcast.

2.  Pick the broadcast type

Pick Text Broadcast or Audio Broadcast.

3.  Fill in the details

Enter the message, delivery method and recipients.

4.  Set the send time

In the Schedule section, choose a Date and a Time.

  Tip

There's no separate Send later button. To send right away, pick today's date and the current time.

5.  Save the broadcast

Click Add Broadcast. The broadcast shows as Scheduled until it sends.

Special Announcement (Notify tab)

Special Announcement (Notify tab)

An urgent text-to-speech message (using the "Joanna" voice) that plays immediately for all callers before any menus. Only one Special Announcement can be active at a time.

Inbound messages and voicemail (Messages tab)

Inbound messages and voicemail (Messages tab)

The Messages tab is the central inbox for resident communications, voicemails and SMS threads. Messages are sorted into General, Leasing and Courtesy inboxes based on the caller's menu selection.

Listen to voicemails and read transcripts

Listen to voicemails and read transcripts

Click the play button next to a message to listen to the audio and view the automatic text transcript.

Add internal notes to a message

Add internal notes to a message

Click the text in the Message column to open the note drawer. Add internal comments (up to 150 characters) to document follow-ups.

Mobile sync

Messages sync in real time across devices, preserving full SMS history and any attached photos.

Frequently asked questions

A deactivated user is still receiving Call Management (CMv2) email notifications. Why?

Changes can take time to sync, so notification recipients may not update immediately after deactivation. Remove the deactivated user from the CMv2 notification recipient list for the relevant property or portfolio, then confirm the emails stop.

I get an error when saving teams or an on-call schedule. How do I fix it?

This also covers schedules that behave unexpectedly, like duplicate backups you can't clean up. One or more contacts doesn't meet CMv2 requirements, for example a missing required role, a missing mobile phone number, or duplicate or invalid backup assignments. Update the contact details (add the role or mobile number, remove duplicates), then save again.

Was this article helpful?
0 out of 0 found this helpful